Making Wise Plumbing Decisions

« Back to Home

Are You Making These Common Water Heater Mistakes?

Posted on

The water heater is typically out of sight, so it is quite easy to overlook some common mistakes that cause serious issues and even injuries. Water heater safety is crucial, and many common mistakes could be putting your entire family at risk. In other cases, mistakes are simply annoyances.

Want to avoid making one of these water heater mistakes? Read on to see how you can avoid errors when selecting, installing, and maintaining your appliance.

Mistake #1: Choosing a Small Water Heater

You need to have an accurate idea of your water needs when you install a water heater in your home. Without a large enough supply, you will find yourself using cold water more often than you realize. Rather than simply choosing the most affordable heater, ensure that you are considering capacity as well.

Mistake #2: Soldering Closely to the Tank

If you need to solder connections during installation, make sure that you are not working too close to the tank. When you solder, the heat could actually melt plastic inside the tank. If possible, you should remove the elements requiring soldering and work on them elsewhere before replacement.

Mistake #3: Failing to Install an Overflow Tube

If your temperature and pressure relief valve happens to open, anybody in the area could be scalded with hot water. An overflow tube can prevent this from happening, ultimately minimizing the risk of injury to anybody near your water heater. Make sure to use the tube to divert any potential water out of the way.

Mistake #4: Not Securing a Water Heater

Whether you have recently installed a water heater or you already have one in place, you need to secure it. Water heaters can tip and fall over, especially if you live in an area prone to earthquakes. If the tank does tip over, you could experience water damage, property damage, and even personal injury.

Mistake #5: Ignoring Blocked Pipes

Water heaters with fluke pipes can experience blockage. You can remedy this problem by providing your pipes with proper space for exhaustion. Unfortunately, failing to do this could allow carbon dioxide to make its way into your house. This is one mistake that can be fatal for your family. You should inspect your heater after installation to check for blockages.

Hiring a professional is one great way to avoid any of these water heater mistakes. Call your local water heater installation specialists to keep your family safe and your home in working order.


Share